How to Choose the Right Device for JUSTVAPE 100ml 50/50 E-Liquid
A 50/50 shortfill needs a different setup from a high-VG 70/30 cloud chaser. Here is the UK 2026 guide to picking the right pod kit, coil resistance and wattage for JUSTVAPE 100ml.
JUSTVAPE 100ml is a 50/50 shortfill so it needs a low-to-mid power MTL or RDL pod kit, not a sub-ohm cloud tank.
Sweet spot: 0.6 to 1.0 ohm coil, 12 to 25W, refillable pod kit. Add two 18mg nic shots for 3mg or vape it as 0mg.
Shop JUSTVAPE 100ml 50/50 shortfills
UK-made 100ml 50/50 shortfill e-liquid bottles, designed for MTL and RDL pod kits. Nicotine-free supplied with space for two nic shots, or vape as 0mg. In store advice in Omagh and Strabane on which device pairs cleanest, or free UK delivery on orders over £50.
Why the device matters as much as the e-liquid
A 50/50 shortfill is a different category of e-liquid from the 70/30 high-VG shortfills you see in most large bottles. JUSTVAPE 100ml uses an equal balance of vegetable glycerin and propylene glycol, which makes it thinner, sharper on flavour and ideally suited to MTL or RDL pod kits. Run it through the wrong device and the liquid leaks, the flavour mutes and the coil burns out fast.
The single biggest mistake we see at the Omagh and Strabane counter from new shortfill buyers is treating all 100ml bottles the same. They are not. A 70/30 Wick Liquor or Riot Squad shortfill needs a sub-ohm tank running 30 to 60W. A 50/50 JUSTVAPE 100ml shortfill needs a pod kit running 12 to 25W. Same bottle size, completely different setup.
The good news is that the 50/50 ratio is the most forgiving format for everyday vapers, and it works in a much wider range of devices than its high-VG cousin. Most refillable pod kits, vape pens and starter MTL kits handle 50/50 cleanly.
Why 50/50 needs lower wattages
VG is what creates the dense vapour cloud at high wattage. With only 50% VG, JUSTVAPE 100ml does not produce big clouds and never will, no matter how high you crank the wattage. What it does produce is concentrated, accurate flavour and a meaningful throat hit. Running 50/50 at 30W+ does not make it stronger, it just burns the e-liquid and ruins the flavour. The 12 to 25W band is where it shines.
Coil resistance, not wattage, is the first decision
Pick the coil first. 0.6 to 0.8 ohm mesh pods give the cleanest flavour with 50/50 liquids and suit an RDL (restricted direct-to-lung) draw. 1.0 to 1.2 ohm pods give a tighter MTL (mouth-to-lung) cigarette-style draw with a more pronounced throat hit. Most modern pod kits ship with both options included, so you can try both with the same kit. Our pod and tank setups guide covers each pairing in detail.
What about prefilled disposable-style pod kits?
The post-2025 prefilled pod kits like Lost Mary BM6000 or SKE Crystal Pro are not designed to be refilled with 100ml shortfill. They use sealed pods with proprietary e-liquid. If you want to use JUSTVAPE 100ml, you need a refillable pod kit with replaceable or refillable pods.
Aspire Pockex or Innokin Endura T22
Inhale-activated, fixed wattage, simple refill. Both handle 50/50 cleanly and cost around £23 to £25 in starter kit form.
Vaporesso XROS 5 or OXVA Xlim Pro 2
0.8 ohm mesh pods, adjustable airflow, 1500mAh battery. The cleanest flavour for 50/50 in a modern pod kit.
Sub-ohm DTL tanks
0.4 ohm or below at 40W+ is built for 70/30 shortfills. JUSTVAPE 100ml in that setup leaks and mutes the flavour.
Sealed pod disposables
Prefilled disposable-style pod kits (BM6000, Crystal Pro, etc) cannot be refilled with shortfill. Use a refillable pod kit instead.
4 steps to a clean first JUSTVAPE 100ml session
The pattern the Omagh and Strabane team walks new 100ml buyers through at the counter.
Check your device VG/PG range
The pod kit box or product page lists the recommended e-liquid type. 50/50 compatible devices say so. If you are unsure, ask in store before buying.
Mix in your nic shots first
Add two 18mg shots for 3mg nicotine, or skip if you vape 0mg. Shake the bottle for 30 seconds and let it sit 5 minutes before filling the pod.
Prime the coil
Fill the pod, then wait 5 minutes before the first puff. Skipping this step burns the coil and ruins the flavour for the rest of that pod.
Start at 14 to 16W
If your pod kit has adjustable wattage, start in the lower half of the recommended range. Step up only if the flavour feels weak. 50/50 does not need high wattage.
Once your device and wattage are dialled in, the next decision is nicotine. Our nic shot mixing guide covers the exact ratios for freebase and salt shots at every common end strength.
JUSTVAPE 100ml Consumer Guides hub
Device pairing, nic shot mixing, flavour rankings, cost comparison and what makes a 50/50 shortfill different from a high-VG bottle.
For the wider picture of where 50/50 shortfills fit in the post-ban UK vape market, the JUSTVAPE 100ml Consumer Guides hub covers everything from device choice to nic shot mixing to long-term value vs 10ml bottles. The Omagh and Strabane teams have been recommending 50/50 shortfills as the everyday all-rounder for years, so the advice in store and in these guides is grounded in real customer experience.
Related articles
Frequently asked questions
What kind of device works best with JUSTVAPE 100ml 50/50 e-liquid?
Can I use JUSTVAPE 100ml in a sub-ohm tank?
What is the difference between 50/50 and high-VG e-liquid?
Do I need to add nicotine to JUSTVAPE 100ml?
What coil resistance is ideal for 50/50 e-liquid?
What wattage should I run JUSTVAPE 100ml at?